How To Add An Electrical Outlet From A Light Switch
How To Add An Electrical Outlet From A Light Switch. Running electrical wire behind a wall is a great way to add an additional outlet or light switch in your home. In this configuration, all power for the circuit runs through the metal linkage within the receptacle itself.
Power in black from the light is connected to the black from the receptacle and a pigtail that goes to one side of the switch. How to run electrical wire for an outlet or light switch. First, you can wire the receptacle so the incoming wires connect to one pair of hot and neutral screw terminals on the receptacle, and the outgoing wires connect to the other pair of screw terminals.
Bare Wire To The Green Grounding Screw.
Mount the new box in the opening. The incoming power from the outlet is attached to one of the light switch screw terminals and the black wire of the cable leading to the light fixture is attached to the other light switch screw terminal. Connect the last switch in the usual manner, looping the wire around the screw in a clockwise direction.
At The Switch, The Black Wire Is Connected To The New Switch.
Adding an outlet from a light switch is easy, and it takes just a few dollars and a couple hours to do. You will also need to remove all staples, nails, tacks, switches, and outlet covers before you actually start paneling your wall. Power out to the light goes to the other side of the switch.
Back At The Source, The Neutral Wire Is Spliced To The White Wire Running To The Light And To A Pigtail Connecting Back To The Receptacle Neutral Terminal.
You don’t have the neutral conductor that you need for a receptacle outlet. If you know which breaker in your electrical panel serves that circuit, then switch it off. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.
Now You Can See That To Attempt To Add An Outlet Or A Receptacle From This Switch Box Will Not Work In This Particular Situation.
Connections to the outlet are basically color to color for the blacks, whites and green or bare ground wires. In this configuration, all power for the circuit runs through the metal linkage within the receptacle itself. Very handy and easy to use.
Remove The Wire Nut On The Neutral Wires By Unscrewing It.
Running electrical wire behind a wall is a great way to add an additional outlet or light switch in your home. You can then put the old outlet off to the side and you’ll be left with five wires:. The position (on or off) of the switch turns the light on or off.